BM40 Bending Machine
Another production of this company is the BM40 Bending Machine, which is capable of bending rebar up to size 36 from 0 to 360 degrees. This machine utilizes movable arms to not only increase bending precision but also perform rebar arching (helical bending) operations. Furthermore, for the convenience of users during bending operations, both a foot pedal and a push-button can be used.
Khamout Gostar Company, provider of Bending Machines, is at your service:
BM25 Bending Machine
BM32 Bending Machine (Three-Phase)
BM20 Bender and Stirrup Machine
Concrete disintegrates over time; to prevent this, concrete is reinforced with rebars, a process known as reinforcement (armature tying). Reinforcement is one of the most critical stages in constructing concrete buildings and must be performed with utmost precision. For this important stage, rebars must be bent or cut; this task is done by hand if the rebars are thin, and by machine if they are thick.
The first definition you should be familiar with is the term “rebar bending.” Rebar bending means changing its shape without breaking it. In the bending process, the force applied around a point gives the rebar different shapes. In fact, the shape of the bend depends on where the rebar will be used. During this process, the outer surface of the rebar is stretched while the inner surface is compressed. This tension is what actually causes the rebar to bend. Khamout Company provides various rebar bending and cutting products for you. To order or inquire about the price of the BM40 bending machine, please contact us at 09133250695.
The various shapes of rebar or types of rebar bends after processing are as follows:
Straight Rebar (Rasta)
Stirrup (Khamout)
Bent-up Bar (Edka)
Crosstie / J-Hook (Sanjaghak)
U-Stirrup (Rekabi)
Chair Bar (Kharak)